Equipment - Roll-On
Roll-On Machines
- Box Roll-On
Fixture remains stationary while moveable stamping head decorates flat or contoured surfaces. View Video. - R-070 Vertical Roll-On
This machine is capable of decorating 360 degrees around cylindrical parts such as cosmetic cases, cups, flower pots and other similar parts. View Video. - R-070 Auto Pen/Pencil
The Auto Pen machine applies Hot Stamp Foil or Heat Transfers to pen barrels and pen caps. The R-070 is also available in a Pencil Model. View Video. - R-150 - R-300
Various roll-on conveyor models from 6" to 12" conveyor widths. Used for stamping foil to flat surfaces on a variety of substrates. View Video. - R-300 Conveyor Roll-On
This conveyor applies decorative foil to flat surfaces on a variety of substrate. The roller height is adjustable to accommodate stamping different height parts. View Video. - R-750
Roll-On conveyor for stamping foil to flat surfaces on a variety of substrates. View Video. - R-1200
The R-1200 and CPS Conveyor Line of equipment effortlessly decorates a wide range of substrates. Some of those substrates include: leather, vinyl, plastics and wood. View Video. - CRP 300
Roll -On conveyor for stamping foil to flat surfaces on a variety of substrates. View Video. - DRT-200
This machine is ideal for applying Heat Transfers with eyemark registration to flat surfaces up to 18 inches in length. The DRT-200 is also capable of applying a wide range of Hot Stamp applications. View Video. - Conveyor Roll-On 60"
60" wide roll on to apply decorative foils to large flat surfaces. View Video.
- VRO 18
Vertical roll-on application for round, oval applications with or without taper. View Video.
- VRO PVT 400
Vertical roll-on application with pivoting system. decorates round, oval containers with or without taper. View Video.
- VRO PVT 600
Vertical roll-on application with pivoting system. decorates round, oval containers with or without taper. View Video.
- VROWB06 Waterbottle
Offering two models of Hot Stamping machinery. View Video.
- Mandrel supported. A simple mandrel fixture supports the waterbottle while the heat transfer is being
applied. This eliminates the need to inject air in the bottle which has the following advantages:
a) decreased cycle time, b) eliminates contamination from air inside the bottle. View Video.
- Air injected. Injects air into the waterbottle in order to release the heat transfer design. View Video.
CPS Resources' ability to produce Hot Stamp Equipment, in combination with our manufacturing of Hot Stamp Foil and Heat Transfers, allows us to offer a turnkey solution to your decorating needs.
R-300
The R-300 Roll-On Conveyor applies decorative foil to flat surfaces on a variety of substrates. The roller height is adjustable to accommodate stamping different height parts.
The R-300 and CPS Conveyor Line of equipment effortlessly decorates a wide range of substrates. Some of those substrates include: leather, vinyl, plastics and wood.
STANDARD FEATURES
- Ground steel side frames with welded steel support frame, casters and leveling screws
- Roller assembly guided by 4 hardened steel shafts and 8 ball bushings
- Threaded adjustment to tilt roller assembly to level roller to part
- Adjustable stamping height with easy to adjust crank handle for stamping different size parts
- Adjustable part guide
- Roller assembly is spring loaded making it possible to stamp slightly curved parts
- Ceramic heaters for quick heat recovery
- Non-contact infrared temperature sensor
- Quick change roller design
- 4" bore x 2" stroke double acting rod end cylinder with fine tuning roller stamping depth stop and flow controls
- Air safety shut off valve to keep roller from falling if air pressure is lost • Filter, regulator and automatic lubricator
- Tool Kit
ELECTRICAL CONTROLS
- Proportioning temperature control with digital display
- Power on, heaters on, foil on, roller motor on, conveyor on and conveyor manual auto switches
- Start, stop and foil advance buttons
- Variable speed stamping control
- Variable speed waste foil take-up system with variable tension adjustment
SPECIFICATIONS
R-200 Conveyor Roll-On
| Max Stamping Pressure | 250 Kgf / cm2 / 500 PSI |
| Stamping Roller Size | 58.5 x 125 x 200mm
2.30" x 5" x 8" |
| Stamping Roller Stroke | 40-60mm / 1.5"x 2.25" |
| Head Adjusting Distance | 0-150mm / 0-6" |
| Conveyor Width | 220mm / 8.66" |
| Conveyor Length | 1200mm / 48" |
| Max Foil Width | 220mm / 8.66" |
| Heaters | 220 V x 500 watts, 6 each |
| Machine Weight | 550 Kg/1200 lb. |
| Voltage Required | 220 V x Single Phase x 60 Hz |
| Machine Size (W,L,H) | 1000x700x1600mm 39"x27"x62" |
| Stamping speed/sec | 0-150mm/0-6" |
| Air Supply | 5-6 Bar / 70-90 PSI |
R-300 Conveyor Roll-On
| Max Stamping Pressure | 250 Kgf / cm2 / 500 PSI |
| Stamping Roller Size | 58.5 x 125 x 300mm 2.30" x 5" x 12" |
| Stamping Roller Stroke | 40-60mm / 1.5"x 2.25" |
| Head Adjusting Distance | 0-150mm / 0-6" |
| Conveyor Width | 320mm / 12.5" |
| Conveyor Length | 1200mm / 48" |
| Max Foil Width | 320mm / 12.5" |
| Heaters | 220 V x 500 watts, 6 each |
| Machine Weight | 550 Kg/1200 lb. |
| Voltage Required | 220 V x Single Phase x 60 Hz |
| Machine Size (W,L,H) | 1000x700x1600mm
39"x27"x62" |
| Stamping speed/sec | 0-150mm/0-6" |
| Air Supply | 5-6 Bar / 70-90 PSI |
P/N LM-006
Rev. 0. 09/98
| Back to Top |
Model R-1200
This 48" Roll-On machine can apply decorative foils to large flat surfaces up to 48" wide and from 1/8" to 6" thick. The R-1200 and CPS Conveyor Line of equipment effortlessly decorates a wide range of substrates. Some of those substrates include: leather, vinyl, plastics and wood.
STANDARD FEATURES
- Welded steel support frame with casters and leveling screws
- 48" wide x 48" long conveyor
- Adjustable stamping height for foiling different height parts
- 8" diameter silicone roller
- Ceramic heaters for quick heat recovery
- Non-contact infrared temperature sensor
- (2) 6" bore cylinders for consistent stamping pressure on the roller
- Filter, regulator and automatic lubricator
- Proportioning temperature control with digital display
- Infrared non-contact temperature sensor
ELECTRICAL CONTROLS
- Power on, heaters on, variable speed stamping control, variable speed foil control
- 4 Emergency stop buttons, on each corner of machine
SPECIFICATIONS
| Max Stamping Pressure | 6 ton |
| Head Stroke | 50mm |
| Conveyor Speed | 7-12 m/min |
| Stamping width | Max 1220mm |
| Stamping Roller | 200 x 1240mm |
| Voltage Required | 220 V x Three Phase |
| Machine Weight | 1500 Kg |
| Machine Size (W,L,H) | 1325x1410x1959mm |
| Air Pressure | 5-6 Kgf/cm2 |
| Power Rating | 7.5 Kw |
P/N LM-004
Rev. 0. 05/98
| Back to Top |
Model R-070 Vertical Roll
The R-070 Vertical Roll-On machine is used to decorate 360° around cylindrical parts such as cosmetic cases, cups, flower pots and other similar parts.
Model R-070 Rotary Index Table
The Rotary Index Table, shown at the left, is an optional feature that can be used for increased production.
STANDARD FEATURES
- Ground steel side frames with welded steel tubing support frame with casters and leveling feet
- Adjustable stamping height with easy to adjust crank handle
- Roller assembly guided by 2 hardened steel shafts and ball bushings
- Fine thread tilt adjustment to level roller to part
- Ceramic heaters for quick heat recovery
- Non-contact infrared temperature sensor
- Quick change roller design
- 2.5" bore x 2.5" stroke double acting double rod end cylinder with fine tuning roller stamping depth adjustment stop and flow controls
- Filter, regulator and automatic lubricator
- Tool kit
ELECTRICAL CONTROLS
- Proportioning temperature control with digital display
- Dwell, foil start and foil stop timers
- Part counter and stop button
- Power on, heaters on, tension on and set-up run switch
- Adjustable stamping and foil pull speed
OPTIONS
• Multicolor heat transfer indexing system with dual photo eye registration with easy to adjust left to right and front to back transfer placement
• Tooling fixtures
• Rotary indexing tables
• Auto eject systems
• Fully automated systems
• Pneumatic powered slide tables
• Automatic feed bowls
• XYR tables
SPECIFICATIONS
Max Stamping Pressure |
180 Kg / 1/4 Ton |
Stamping Roller Size |
58.5x125x70mm/2.30"x5"x3" |
Stamping Roller Stroke |
63mm/2.25" |
Roller Height Adjustment |
0-200mm/0-8" |
Max Foil Width |
0-100mm/0-4" |
Heaters |
220V x 500 watts, 3 each |
Voltage Required |
220 V, Single phase, 60 Hz |
Machine Weight |
450 Kg/850 lbs. |
Machine Size (LxWxH) |
750x700x1750mm/30"x27"x690" |
Air Supply |
5-6 Bar/70-90 PSI |
P/N LM-006
Rev. 0. 03/99
| Back to Top |
Model R-070 Auto Pen
The R-070 Automatic Pen machine applies Hot Stamp Foil and Heat Transfers to pen barrels and pen caps. The R-070 Model is also available as an Automatic Pencil machine which decorates pencils with Hot Stamp Foil and Heat Transfers.
R-070 Automatic Feed System
This machine has a production rate of 25 Pens each per minute.
STANDARD FEATURES
- Side frames constructed of ground steel with welded steel support frame, casters and leveling feet
- All manufactured components are chrome plated and painted steel
- Roller assembly guided by 4 hardened steel shafts and 8 ball bushings
- Threaded adjustment to tilt roller assembly to level roller to part
- Adjustable stamping height with easy to adjust crank handle for stamping different size parts
- Air over hydraulic slide table for smooth actuation while part is being stamped
- Large table for mounting tooling fixtures
- Adjustable stamping speed control
- Ceramic heaters for quick heat recovery
- Non-contact infrared temperature sensor
- Quick change roller design
- 4 inch bore x 3 inch stroke double acting double rod end cylinder with fine tuning roller stamping depth stop and flow controls
- Air safety shut off valve to keep roller from falling if air pressure is lost
- Filter, regulator and automatic lubricator
- Three sided plexiglas guarding with photo electric light curtain across front of machine for operator safety
- Tool kit
ELECTRICAL CONTROLS
- Proportioning temperature control with digital display
- Dwell, foil start and foil stop timers
- Total part counter
- Variable speed electrical tension control with variable tension adjustment to keep slack out of foil or transfer while part is being stamped
- Manual and automatic controls
- Power on, heaters on, tension on, roller motor on, table on, stamping mode manual-auto and foil or heat transfer switch
- Start, stop, foil-transfer advance, table forward and table reverse buttons
- Variable foil and tension speed controls
- Multi-color heat transfer indexing system with dual photo eye registration with easy to adjust left to right and front to back transfer placement
- Photo electric safety light curtain across front of machine
SPECIFICATIONS
MODEL R-070 AUTO PENCIL |
|
Max Stamping Pressure |
180 Kg / 400lb. |
Stamping Roller Size |
58.5x125x200mm/2.30"x5"x8" |
Stamping Roller Stroke |
40-60 mm / 1.5 x 2.25" |
Head Adjusting Distance |
0-50 mm / 0-2" |
Conveyor Width |
200mm / 8" |
Conveyor Length |
520mm / 20.5" |
Maximum Foil Width |
200mm / 8" |
Heaters |
220 V x 500 watts, 4 each |
Voltage Required |
220 V, Single Phase, 60 Hz |
Machine Weight |
550 Kg / 1215 lbs. |
Machine Size |
750x800x1960mm / 30"x32"x77" |
Production Rate |
25 each / min. |
Air Supply |
5-6 Bar / 70-90 PSI |
MODEL R-070 AUTO PEN |
|
Max Stamping Pressure |
250 Kg / cm2 / 500lb. |
Stamping Roller Size |
58.5x125x100mm/2.30"x5"x4" |
Stamping Roller Stroke |
40-60 mm / 1.5 x 2.25" |
Head Adjusting Distance |
0-100 mm / 0-4" |
Conveyor Width |
140mm / 5.5" |
Conveyor Length |
520mm / 20.5" |
Maximum Foil Width |
100mm / 4" |
Heaters |
220 V x 500 watts, 3 each |
Voltage Required |
220 V, Single Phase, 60 Hz |
Machine Weight |
550 Kg / 1100 lbs. |
Machine Size |
1225x1226x1875mm / 49"x50"x75" |
Production Rate |
25 -30 each / min. |
Air Supply |
5-6 Bar / 70-90 PSI |
| Back to Top |
Model DRT-200
This machine is used primarily to apply Foil or Heat Transfers to elongated parts. The operation of the DRT-200 eliminates air entrapment during the foiling process.
Model DRT-200 Control Panel
Pictured is the manual control panel of the DRT-200. The manual controls allow step by step operation for part placement and set-up.
Applications
The DRT-200 is ideal for:
- Applying Heat Transfers with eyemark registration to flat surfaces up to 18 inches in length
- A wide range of Hot Stamp Foil applications
STANDARD FEATURES
-
Side frames constructed of ground steel with welded steel support frame, casters and leveling feet
- All manufactured components are chrome plated and painted steel
- Roller assembly guided by 4 hardened steel shafts and 8 ball bushings
- Threaded adjustment to tilt roller assembly to level roller to part
- Adjustable stamping height with easy to adjust crank handle for stamping different size parts
- Air over hydraulic slide table for smooth actuation while part is being stamped
- Large table for mounting tooling fixtures
- Adjustable stamping speed control
- Ceramic heaters for quick heat recovery
- Non-contact infrared temperature sensor
- Quick change roller design
- 4 inch bore x 3 inch stroke double acting double rod end cylinder with fine tuning roller stamping depth stop and flow controls
- Air safety shut off valve to keep roller from falling if air pressure is lost
- Filter, regulator and automatic lubricator
- Three sided plexiglas guarding with photo electric light curtain across front of machine for operator safety
- Tool kit
ELECTRICAL CONTROLS
- Proportioning temperature control with digital display
- Dwell, foil start and foil stop timers
- Total part counter
- Variable speed electrical tension control with variable tension adjustment to keep slack out of foil or transfer while part is being stamped
- Manual and automatic controls
- Power on, heaters on, tension on, roller motor on, table on, stamping mode manual-auto and foil or heat transfer switch
- Start, stop, foil-transfer advance, table forward and table reverse buttons
- Variable foil and tension speed controls
- Multi-color heat transfer indexing system with dual photo eye registration with easy to adjust left to right and front to back transfer placement
- Photo electric safety light curtain across front of machine
SPECIFICATIONS
Max Stamping Pressure |
250 Kg / 500lb. |
Stamping Roller Size |
58.5x125x200mm / 2.30"x5"x8" |
Stamping Head Stroke |
0-75 mm / 0-3" |
Head Adjusting Distance |
0-150 mm |
Table Stroke |
0-850mm / 0-33" |
Possible Stamping Size (W,L,H) |
200x700x550mm / 8"x27.5"x21" |
Actual Output pcs/hour |
150-250 each / hour |
Maximum Foil Width |
200mm / 8" |
Foil Feed Distance |
0-750mm / 0-30" |
Heaters |
Ceramic 500 watts, 6 each |
Voltage Required |
220 V, Single phase, 60 Hz |
Machine Weight |
850 Kg / 1875 lbs. |
Machine Size |
1800x700x2050mm / 70"x27"x80" |
Air Supply |
5-6 Bar / 70-90 PSI |
P/N LM-007
Rev. 0. 09/98
| Back to Top |
